Skip to main content

Open-Source Leg: The quest to create a bionic limb that anyone can build

If you wanted to cover a large distance and had the world’s best sprinters at your disposal, would you have them run against each other or work together in a relay? That, in essence, is the problem Elliott Rouse, a biomedical engineer and director of the Neurobionics Lab at the University of Michigan, Ann Arbor, has been grappling with for the best several years.

Rouse, an engineer, is one of many working to develop a control system for bionic legs, artificial limbs that use various signals from the wearer to act and move like biological limbs.

Open-source bionic leg aims to rapidly advance prosthetics

“Probably the biggest challenge to creating a robotic leg is the controller that’s involved, telling them what to do,” Rouse told Digital Trends. “Every time the wearer takes a step, a step needs to be initiated. And when they switch, the leg needs to know their activity has changed and move to accommodate that different activity. If it makes a mistake, the person could get very, very injured — perhaps falling down some stairs, for example. There are talented people around the world studying these control challenges. They invest years of their time and hundreds of thousands of dollars building a robotic leg. It’s the way things have been since this field began.”

Promoting collaboration

Only, according to Rouse, that’s a broken system. It’s understandable that competing high-tech firms hunker down in secrecy when they’re developing the Next Big Thing they hope will sell a gajillion units and add another few hundred billion dollars or more to their market cap. But it’s less understandable when research institutes waste brilliant minds by getting them to solve the same problems that other universities are solving as well. Heck, even once sworn enemies Apple and Google work together when the stakes are high enough.

“The academic system isn’t super good at fostering collaborative research,” Rouse admitted. “As a professor, I have a job to do where I’m measured on certain things like federal funding, grants that are published, and students that I mentor. If you look at the way the academic system establishes the benchmark for faculty in research labs, collaboration is [actually kind of] de-emphasized.”

Joseph Xu/Michigan Engineering, Communications & Marketing

When it comes to control systems for bionic limbs, the problem is that, in order to even be able to start developing control systems, individual research labs around the world first have to build the underlying hardware. To return to the earlier analogy, that’s worse than, say, Apple and Samsung developing competing smartphones in top-secret; it would be more like Apple and Samsung having to build their own computer operating systems from scratch before starting to design their next-generation smartphone.

This is where Rouse’s project, the Open-Source Leg, comes into play. As the researchers behind it explain on a dedicated webpage: “The overarching purpose of this project is to unite a fragmented field[R]esearch in prosthetic hardware design, prosthetic control, and amputee biomechanics is currently done in silos. Each researcher develops their own robotic leg system on which to test their control strategies or biomechanical hypotheses. This may be successful in the short term since each researcher produces publications and furthers knowledge. However, in the long term, this fragmented research approach hinders results from impacting the lives of individuals with disabilities — culminating in an overarching failure of the field to truly have the impact that motivated it.”

Here comes the bionic leg

The Open-Source Leg is, as its name suggests, an open-source bionic leg that could become the ubiquitous hardware system for facilitating growth in the area of prostheses control. The design is simple (meaning easily assembled), portable (lightweight and powered by onboard batteries), economical (it costs between $10,000 and $25,000, compared to the $100,000-plus commercially available powered prosthetics), scalable and customizable. Detailed instructions are available online to follow, and Rouse and his colleagues will even build them and ship them out to researchers when creating one themselves is not possible.

Joseph Xu/Michigan Engineering, Communications & Marketing

In the process, the project seeks to achieve three goals. The first of these is to identify an electromechanical design that can be used for low-cost, high-performance, open-source robotic knee and ankle systems. Secondly, to understand how separate prosthesis control strategies can be combined in order to benefit amputee gait. Finally, the Open-Source Leg project wants to validate its proposed open-source system as a tool for research on prosthesis control. If these research goals can be met, it could turn out to be the game-changer its creators hope it will be.

“In my lifetime, we’re going to see bionic limbs that can use neural information, either on the cortical or peripheral nerve level, to tell us gross movement,” Rouse said. “That will give us control without the need for onboard sensors.” This revolution, he said, is already happening. While fine-grain dexterous movement could take longer than this, it is not necessarily a sci-fi dream that is many lifetimes away from happening.

And if people can figure out how to work together, it could be here a lot quicker.

Luke Dormehl
I'm a UK-based tech writer covering Cool Tech at Digital Trends. I've also written for Fast Company, Wired, the Guardian…
Digital Trends’ Top Tech of CES 2023 Awards
Best of CES 2023 Awards Our Top Tech from the Show Feature

Let there be no doubt: CES isn’t just alive in 2023; it’s thriving. Take one glance at the taxi gridlock outside the Las Vegas Convention Center and it’s evident that two quiet COVID years didn’t kill the world’s desire for an overcrowded in-person tech extravaganza -- they just built up a ravenous demand.

From VR to AI, eVTOLs and QD-OLED, the acronyms were flying and fresh technologies populated every corner of the show floor, and even the parking lot. So naturally, we poked, prodded, and tried on everything we could. They weren’t all revolutionary. But they didn’t have to be. We’ve watched enough waves of “game-changing” technologies that never quite arrive to know that sometimes it’s the little tweaks that really count.

Read more
Digital Trends’ Tech For Change CES 2023 Awards
Digital Trends CES 2023 Tech For Change Award Winners Feature

CES is more than just a neon-drenched show-and-tell session for the world’s biggest tech manufacturers. More and more, it’s also a place where companies showcase innovations that could truly make the world a better place — and at CES 2023, this type of tech was on full display. We saw everything from accessibility-minded PS5 controllers to pedal-powered smart desks. But of all the amazing innovations on display this year, these three impressed us the most:

Samsung's Relumino Mode
Across the globe, roughly 300 million people suffer from moderate to severe vision loss, and generally speaking, most TVs don’t take that into account. So in an effort to make television more accessible and enjoyable for those millions of people suffering from impaired vision, Samsung is adding a new picture mode to many of its new TVs.
[CES 2023] Relumino Mode: Innovation for every need | Samsung
Relumino Mode, as it’s called, works by adding a bunch of different visual filters to the picture simultaneously. Outlines of people and objects on screen are highlighted, the contrast and brightness of the overall picture are cranked up, and extra sharpness is applied to everything. The resulting video would likely look strange to people with normal vision, but for folks with low vision, it should look clearer and closer to "normal" than it otherwise would.
Excitingly, since Relumino Mode is ultimately just a clever software trick, this technology could theoretically be pushed out via a software update and installed on millions of existing Samsung TVs -- not just new and recently purchased ones.

Read more
AI turned Breaking Bad into an anime — and it’s terrifying
Split image of Breaking Bad anime characters.

These days, it seems like there's nothing AI programs can't do. Thanks to advancements in artificial intelligence, deepfakes have done digital "face-offs" with Hollywood celebrities in films and TV shows, VFX artists can de-age actors almost instantly, and ChatGPT has learned how to write big-budget screenplays in the blink of an eye. Pretty soon, AI will probably decide who wins at the Oscars.

Within the past year, AI has also been used to generate beautiful works of art in seconds, creating a viral new trend and causing a boon for fan artists everywhere. TikTok user @cyborgism recently broke the internet by posting a clip featuring many AI-generated pictures of Breaking Bad. The theme here is that the characters are depicted as anime characters straight out of the 1980s, and the result is concerning to say the least. Depending on your viewpoint, Breaking Bad AI (my unofficial name for it) shows how technology can either threaten the integrity of original works of art or nurture artistic expression.
What if AI created Breaking Bad as a 1980s anime?
Playing over Metro Boomin's rap remix of the famous "I am the one who knocks" monologue, the video features images of the cast that range from shockingly realistic to full-on exaggerated. The clip currently has over 65,000 likes on TikTok alone, and many other users have shared their thoughts on the art. One user wrote, "Regardless of the repercussions on the entertainment industry, I can't wait for AI to be advanced enough to animate the whole show like this."

Read more