DL-SE 06-165/T-EN54

DL-SE 06-165/T-EN54

  • frameless design
  • suitable also for very thin ceilings
  • WAGO connector 221
DL-SE 06-165/T-EN54
DL-SE 06-165/T-EN54
DL-SE 06-165/T-EN54

Design ceiling speaker with metal firedome for voice alarm applications, certified EN 54-24, suitable for voice announcements and background music with excellent sound quality in buildings.

The frameless design of the new ceiling speakers is inspired by current LED lights and already has the makings of a classic. The 6W powered speaker is equipped with a 165mm full-range loudspeaker and a 100V transformer with 3 power adjustments. The powder-coated metal in RAL 9016 guarantees long-term stability. For additional reliability, the speaker is impregnated against wetness.

The speaker is also secured with protection class IP 21C against the security risks of environmental influences. Fast and easy installation by WAGO 221 connector and strong spring clamps with protective caps for vibration damping. Alternatively, the loudspeaker can also be mounted using a threaded rod (M6 thread). The connecting cables can be supplied by rubber grommets in the fire dome.

Special paint of the speaker in 4-digit RAL- or NCS- colour is available at extra cost. The fire dome is included in the delivery.

This speaker is suitable for a ceiling strength of about 1-45 mm. Our specification is primarily related to solid ceilings, for ceilings with soft materials higher ceiling thicknesses could be necessary. In addition, stronger cables and other fittings may also result in changes in the appropriate setup. With regard to the variety of materials and manufacturers, we recommend building a sample of the speaker to match the requirements accurately.

Article No.: 20173197
ProductDL-SE 06-165/T-EN54
Power 6/3/1,5 W
Impedance (100V) 1667/3333/6667 ohm
Information Frequency Range 63 - 16.000 Hz
Information Frequency Response 56 - 18.000 Hz
Information SPL 1W/1m, peak 97,0 dB
Information SPL 1W/4m, peak 85,0 dB
Information SPL Pmax/4m, peak 92,7 dB
SPL IEC268-5, 1W/1m 92,0 dB
SPL EN54-24, Pmax/4m 87,0 dB
Information Sensitivity EN54-24, 1W/1m 92,0 dB
Information Sensitivity EN54-24, 1W/4m 80,0 dB
Dispersion -6dB, 500Hz h/v 180°
Dispersion -6dB, 1KHz h/v 175°
Dispersion -6dB, 2KHz h/v 150°
Dispersion -6dB, 4KHz h/v 90°
Connector WAGO 221 connector
Terminal diameter 2,3 mm
Maximum cable passage 4 mm²
Temperature range -10 / +55 °C
Dimensions 220x107 mm
Ceiling Cut-out 194 - 202 mm
Type A/B A
IP Rating IP21
Weight (net) 1,4 kg
Colour RAL 9016
Mounting spring clamp
Packing Unit 8
Ref. Nr. 001-18
ID-Code SAA-1801
Certificate Number 1438-CPR-0642
CE Year 19
EN 54-24 UV Protected Damp protection Cable protection Shock Resistant Measurements Special Colours Metal Fire Dome IP21
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating as well as the temperature range specified are based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.
Technical Drawing
Sensitivity
SPLmax
DL-SE 06-165/T-EN54
Isobar
DL-SE 06-165/T-EN54
Polar Diagram 500Hz
DL-SE 06-165/T-EN54
Polar Diagram 1000Hz
DL-SE 06-165/T-EN54
Polar Diagram 2000Hz
DL-SE 06-165/T-EN54
Polar Diagram 4000Hz
DL-SE 06-165/T-EN54
Polar Diagram 8000Hz

RAL Colour

RAL coating

RAL Colour