Our site uses cookies to give you the best experience. or continue shopping if you're happy.
Accept & close
Cooking
Guides and advice
Helping you make the best choice
Whether washing machines have your head in a spin or hobs are frying your brains, our buying guides are here to help.
Getting tangled up with the tape measure?
Head over to our measurement guides for help checking which cooking appliances will be a perfect fit.
Installation without a hitch
Treating yourself to a new appliance? Take a look at our installation guide. It’ll tell you what we’ll do when we get there, as well as some bits you’ll need to do.
Representative example
24.9% APR Representative (variable). 24.94% PA Purchase rate (variable). £1,200 Assumed credit limit
*Credit and availability of offers are subject to status. Terms apply.
Credit is provided by NewDay Ltd. AO Retail Limited acts as a credit broker for NewDay Ltd on an exclusive basis and is not a lender.
Cooking FAQs
- How to install a built-in oven and hob?
To install a built-in oven and hob requires both to be lifted and placed into their spot in your kitchen. However, depending on the type of appliance, it will involve some electrical or gas work, so we’d recommend having an expert do this. You’ll also legally need the oven and hob checked by a qualified electrician or gas engineer to make sure it all meets safety regulations. With our installation service, we can deliver and set everything up for you. Our fully qualified engineers will have it sorted in a jiffy, so you can keep thinking about what you’ll cook up first.
- What size cable is needed for an electric oven and hob?
The size of the electric cable depends on the wattage you’re working with. For anything up to 7.2kW, you can use a 6mm cable. But if your cooker has a higher power rating, then a 10mm cable will be required. However, you do need a certified engineer to check everything and make sure it’s safe. Luckily, our clever clogs at AO can do all the hard work for you. Just choose our installation service when you check out and we’ll hook everything up when we deliver it. Easy peasy.
- How to fit a gas hob and electric oven?
Fitting a gas hob requires hooking it up to a gas supply, and an electric oven also requires some complex electrical work. With both needing to be certified by an electrical and gas engineer, we’d suggest letting an expert take care of it.
Anything from gas leaks to electrical shorts could occur from improper installation, but luckily our team of qualified engineers is on hand to help. Simply select our installation service when you checkout and we’ll get it ready for you.
- How to clean an oven and a hob?
If it’s time to deep clean your oven and hob, you’re going to need soap, warm water, and a little bit of elbow grease. Luckily, we’ve got an entire cleaning guide to make this easier.
Starting with the hob can make things easy as that just requires a wipe with soap or a cleaning spray. Once you’ve done that, give it a dry and it’ll be sparkling. Just make sure not to use any abrasive materials, as these can leave scratches.
Moving onto the oven, some models have Pyrolytic, catalytic, or steam cleaning which use various methods to loosen burnt-on bits, meaning you just need to start with a wipe. From there, it’s time to add some elbow grease into the mix and scrub the walls and door – just make sure everything has cooled down first.