- Polished Concrete Information
- Polished Concrete Pictures
- What is Polished Concrete
- Polished Concrete Cost
- Design Ideas for Polished Concrete
- Polished Concrete Maintenance
- Common Questions about Polished Concrete
- Can All Concrete be Polished?
- Comparison Chart: Polished concrete versus other flooring materials
- What are Polished Overlays?
- Polishing Products and Equipment: An overview of basic equipment and supplies needed
- Related Information
- Information About: Concrete Floors
- Concrete Contractors: Find Concrete Polishing Products and Suppliers
- Design Ideas: Polished Concrete Info
Polishing Existing Concrete Floors
Find out if you can polish old concrete and get help determining if your floor is a good candidate for polishingAlmost any structurally sound concrete floor, whether new or old, can be polished. But there are some exceptions.
POLISHING NEW FLOORS
For new floors, no special mix design is required to achieve good results. However, the floor should be in place at least 28 days before polishing begins to ensure adequate curing. Some retail and warehouse facilities that plan to polish their floors after placement may specify the installation of as smooth a floor as possible to minimize the polishing steps required.
POLISHING EXISTING FLOORS
For existing floors, polishing enhances their appearance by grinding the concrete down to a smooth, high-gloss finish. Minor cracking and imperfections add to the character of the finished floor. Typically some surface preparation is required prior to polishing to remove dirt, grease, coatings, or blemishes. However, floors that are wavy, need extensive patching, or are extremely porous may not be good candidates for polishing. An experienced contractor can usually determine a floor's suitability.
Need your concrete assessed? Find contractors specializing in concrete polishing near me.
If a contractor determines that your floor cannot be polished, consider resurfacing instead. Resurfacing with a decorative overlay is a great way to disguise flaws such as cracks or stains. Learn more about the difference between polishing and resurfacing.
TIP: To help solidify and densify polished concrete surfaces, some contractors apply penetrating hardeners to the concrete, normally after the first step of the grinding process. These products, which can be applied to new or existing floors, work by reacting chemically with the concrete to form a hard, crystalline structure. They also prevent dusting of concrete and offer extra protection from water penetration and staining.
Contractors: Find concrete polishing equipment and supplies.