Doctors Without Borders Uses Virtual Reality and 3D Printing Technology to Build Better Hospitals

IMTS

Share this Article

3dp_doctorswithoutborders_logoMost of the world knows the French organization that we call Doctors Without Borders as Médecins Sans Frontières, or just MSF. But whatever you call it, MSF is one of the most prolific and important charitable medical aid groups in the world and regularly ventures into dangerous situations simply to give those in need the medical care that they deserve. In 2015 alone more than 30,000 doctors, nurses, water and sanitation engineers, and logistical experts donated their time in more than 70 countries. All of these medical professionals volunteer to help people all over the planet, often at great risk to their own lives.

A VR hospital.

A VR hospital.

Part of what makes MSF such a successful organization is their ability to make every cent that is donated count, and their ability to be ready to adapt to new situations as needed. To make that easier for their volunteers, MSF has successfully tested a way to use 3D printing and virtual reality technology to create new hospitals that better meet the needs of both the patients and the staff that runs it.

MSF technical team leader Elvina Motard worked closely with a team that took the plans for a hospital that was built by MSF in the Philippines, following the devastation caused by Typhoon Haiyan in 2013, and turned them into 3D models. The models were then 3D printed, and used to create  a virtual reality experience using a powerful video game engine that can be experienced using a VR headset. Anyone wearing the VR headset can then navigate through the digital representation of the hospital using a simple game pad.

The MSF staff viewing the 3D printed hospital model.

The MSF staff viewing the 3D printed hospital model. [Image: Alex Yallop/MSF]

“Such technologies will undoubtedly make discussions more efficient, more vivid and more graphic. They will allow people to really see themselves inside our future hospital and this will improve hospital design as well as training and briefings. It will also allow our partners, like local ministries of health, to better understand what we can provide and better feedback on our suggestions,” explained MSF’s director of logistics Jean Pletinckx.

Experiencing a hospital in virtual reality.

Experiencing a hospital in virtual reality.

Typically, when MSF goes to war zones, disaster areas or very remote locations to build a new medical facility, their logistics team uses 2D drawings to plan out the new hospital. However this new method of hospital planning includes creating 3D printed replicas of the hospitals and using VR tech to navigate through it. This method will give the doctors setting up the facility a whole new way to make sure that they are building a hospital that is best suited for the environment that it is located in.

The new 3D experience also allows doctors to have a more realistic environment to explore, which will help them provide better patient care by knowing their way around the facility on day one. Additionally, it will help them plan out an optimized layout that will prevent patient care from being easily disrupted. It can also give doctors and medical experts better ways to spot any potential design or layout problems that may not be noticeable from 2D drawings. And this can all be done before the facility is even constructed.

“As the project develops further, it will be possible to create a dynamic environment, simulating patient and staff movements. We are at a stage now where our staff will really be able to feel or see what they will face in the field before they leave and indeed, even before the structure is built. There is no doubt that this is the way we will work in the future,” Pletinckx continued.

The 3D printed hospital model.

The 3D printed hospital model.

The entire initial 3D printed facility and creation of the virtual reality assets took about four months to complete; however, since the VR assets and 3D printable files have now been made, digital versions of future facilities will take far less time to create. This hospital in the Philippines was simply a proof of concept that was created specifically for their pre-existing facility. However the concept seems to have been successful, and since 3D models can be sent anywhere in the world, the entire medical facility being developed can be created virtually anywhere. The 3D technology used to create this new hospital blueprint program can help MSF create facilities that are the most efficient and effective for doctors and their patients.

Here is some video of the project being used. What do you think? Discuss in the 3D Printed VR Hospital Model forum over at 3DPB.com.

[Source: MSF]

Share this Article


Recent News

Will There Be a Desktop Manufacturing Revolution outside of 3D Printing?

Know Your Würth: CEO AJ Strandquist on How Würth Additive Can Change 3D Printing



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Featured

Pressing Refresh: What CEO Brad Kreger and Velo3D Have Learned About Running a 3D Printing Company

To whatever extent a business is successful thanks to specialization, businesses will nonetheless always be holistic entities. A company isn’t a bunch of compartments that all happen to share the...

Würth Additive Launches Digital Inventory Services Platform Driven by 3D Printing

Last week, at the Additive Manufacturing Users’ Group (AMUG) Conference in Chicago (March 10-14), Würth Additive Group (WAG) launched its new inventory management platform, Digital Inventory Services (DIS). WAG is...

Featured

Hypersonic Heats Up: CEO Joe Laurienti on the Success of Ursa Major’s 3D Printed Engine

“It’s only been about 24 hours now, so I’m still digesting it,” Joe Laurienti said. But even via Zoom, it was easy to notice that the CEO was satisfied. The...

Featured

3D Printing’s Next Generation of Leadership: A Conversation with Additive Minds’ Dr. Gregory Hayes

It’s easy to forget sometimes that social media isn’t reality. So, at the end of 2023, when a burst of doom and gloom started to spread across the Western world’s...