Biz & IT —

How a group of neighbors created their own Internet service

Powered by radios in trees, homegrown network serves 50 houses on Orcas Island.

Ars covers the Doe Bay Internet Users Association.
When you live somewhere with slow and unreliable Internet access, it usually seems like there’s nothing to do but complain. And that's exactly what residents of Orcas Island, one of the San Juan Islands in Washington state, were doing in late 2013. Faced with CenturyLink service that was slow and outage-prone, residents gathered at a community potluck and lamented their current connectivity.

“Everyone was asking, 'what can we do?'” resident Chris Brems recalls. “Then [Chris] Sutton stands up and says, ‘Well, we can do it ourselves.’”

Doe Bay is a rural environment. It’s a place where people judge others by “what you can do,” according to Brems. The area's residents, many farmers or ranchers, are largely accustomed to doing things for themselves. Sutton's idea struck a chord. "A bunch of us finally just got fed up with waiting for CenturyLink or anybody else to come to our rescue,” Sutton told Ars.

Around that time, CenturyLink service went out for 10 days, a problem caused by a severed underwater fiber cable. Outages lasting a day or two were also common, Sutton said.

Faced with a local ISP that couldn’t provide modern broadband, Orcas Island residents designed their own network and built it themselves. The nonprofit Doe Bay Internet Users Association (DBIUA), founded by Sutton, Brems, and a few friends, now provide Internet service to a portion of the island. It’s a wireless network with radios installed on trees and houses in the Doe Bay portion of Orcas Island. Those radios get signals from radios on top of a water tower, which in turn receive a signal from a microwave tower across the water in Mount Vernon, Washington.

"I think people were leery whether we could be able to actually do it, seeing as nobody else could get better Internet out here," Sutton said.

But the founders believed in the project, and the network went live in September 2014. DBIUA has grown gradually, now serving about 50 homes.

“It wasn't that hard”

Back in 2013, CenturyLink service was supposed to provide up to 1.5Mbps downloads speeds, but in reality we “had 700kbps sometimes, and nothing at others,” Brems told Ars. When everyone came home in the evening, “you would get 100kbps down and almost nothing up, and the whole thing would just collapse. It’s totally oversubscribed,” Sutton said.

That 10-day outage in November 2013 wasn't a fluke. At various times, CenturyLink service would go out for a couple of days until the company sent someone out to fix it, Sutton said. But since equipping the island with DBIUA’s wireless Internet, outages have been less frequent and “there are times we’re doing 30Mbps down and 40Mbps up,” Brems said. “It’s never been below 20 or 25 unless we had a problem.”

Unlike many satellite and cellular networks, there is no monthly data cap for DBIUA users.

Sutton, a software developer who has experience in server and network management, says he’s amazed how rare projects like DBIUA are, claiming “it wasn’t that hard.” But from what he and Brems told Ars, it seems like it took a lot of work and creative thinking to get DBIUA off the ground.

“The part of Orcas Island we're on looks back toward the mainland,” Sutton said. “We can see these towers that are 10 miles away, and you realize, ‘hey, can't we just get our own microwave link up here to us from down there, and then do this little hop from house to house to house via wireless stuff?’”

One of StarTouch's microwave backhaul towers.
One of StarTouch's microwave backhaul towers.

The DBIUA paid StarTouch Broadband Services about $11,000 to supply a microwave link from a tower on the mainland to a radio on top of Doe Bay's water tower. The water tank, at about 50 feet, is the only structure that’s high enough to create a point-to-point link to the mainland. It is owned by the Doe Bay Water Users Association, which let DBIUA install the radios and other equipment.

Sutton and friends set up Ubiquiti radios throughout the area, on trees and on top of people’s houses, to get people online. Sutton used Google Earth to map out the paths over which wireless signals would travel, and then the team conducted on-the-ground surveys to determine whether one point could reach another.

Flight of the drones

The rural Orcas Island has a lot of hills and obstacles that could disrupt the wireless signals, and it would have been "prohibitively expensive" for DBIUA to install its own towers. As such, many of the radios had to be installed in trees. Sutton had a solution for this as well—DBIUA would use a drone to determine whether a radio on a treetop could reach other points of the network.

Initially, the drone was equipped with a camera to determine whether the treetop could “see” the next radio in the network. Later, Sutton added radios to the drone itself so he could test the wireless signal at the treetop. When they confirmed a tree would work, “we hired the person to climb up the tree and install the radios,” Sutton said.

Most homes in the network have a radio on the roof or the side of the house that points to one of about 10 relay points, which have multiple radios for receiving and distributing signals. Relay points themselves can be on a tree, a pole, or on the side of a house.

“For some people, like me, the signal comes to my tree, and then down into my house to service me,” Sutton said.

A relay point has one radio to receive a signal and a couple more radios to send it in different directions. Each relay point is similar to the setup on top of the water tank.

A tree will generally have a box with DBIUA equipment, and Power over Ethernet (POE) cables going up the tree to the radios. POE cable also goes from the box “back to the closest power source, usually in someone’s home, and we can then provide that home a connection to the network,” Sutton explained. “In the person’s home is the power brick that puts power into the Ethernet cable,” providing electricity to the outdoor equipment. The system uses low-voltage power, with each radio requiring about eight watts.

The network uses 5.8GHz and 900MHz frequencies, and a little bit of 3.65GHz, mostly avoiding the crowded 2.4GHz band. All the connections need line-of-sight, "especially for 5.8GHz," since the higher frequencies are more easily blocked, Sutton said.

There are now about 200 radios spread throughout the coverage area, and each homeowner who pays for service has a Wi-Fi router in the home to access the Internet.

Channel Ars Technica